FAQs

Virtually all of our lights can be dimmed. Where specific dedicated LED fittings are required, we have a vast array of options including low voltage LED and mains voltage LED (with integral dimmable drivers – also called “Driver on Board”). The majority of our fittings are supplied with retrofittable lampholders. Each has their benefits depending on the use. We would encourage you to get in touch with one of the members of our team for assistance where required when specifying.

Please see our Bathroom section for a dedicated range of bathroom fittings. It is important to note that the IP (ingress protection) rating required by BS EN / IEC / EN standards differ depending on the Zone of the bathroom the light fitting is to be installed in. Please see our specification guide for further information, and please do get in touch if we can assist with specifying the correct product.

We do not have a minimum order quantity for bespoke items. In some instances tooling and mould costs may make 1-offs cost prohibitive, however we will work with you to make suggestions and utilise existing moulds where possible.

(Where we employ our Far Eastern manufacturing facility a minimum order quantity of 200No is applicable.)

Generally we operate to a 6 week lead time for standard and bespoke products (complexity dependent). Where project timescales demand we can normally work with you to establish a coherent delivery schedule, and for urgent projects we have a range of “Quick Ship” products, which are available from our premises in Edinburgh. These ranges can be filtered within each product category.

(For price driven enquiries, where we employ our Far Eastern manufacturing facility, depending on the product, a lead time of 14 weeks applies.)

We distribute for a number of known brands, both designer and trade. If you have a specific fitting/brand in mind, please do get in touch as it’s highly probable we are able to supply.

We can supply bespoke Bathroom Mirrors for hotels and other leisure settings to any specification, with or without frames, and with a variety of accessories available, including demister pads, sensor switches, shaver sockets etc. See our reference guide for more information and examples of previous work.

We would always encourage you to send us the details of your enquiry so we can assist with specifying the most economical and effective way of powering LED strip. We can pre-assemble bespoke lengths/kits to spec., and are on hand to offer advice with regards to dimming, colour changing, DMX control etc.